Get Contracting Bazar of
  • Filters
  • Sort


  • Product : Contracting Bazar X




Showing Results For:

Contracting Bazar


  • NAN 0 Votes

    TRANSIENT EARTH BONDING UNIT 1. Bonding of lightening, electrical and communication equipment earth shall be made through a Transient Earth Bonding Unit to keep each earth systems separate during normal conditions. 2. The offered TRANSIENT EARTH BONDING UNIT shall have: a) Operating Voltage : up to 230 V DC b) Firing Voltage : 230 V DC c) Impulse Firing Voltage : <600 V at 1kV/μs d) Surge Rating : 100KA 10/350μs e) Enclosure : IP66 weather proof non corrosive enclosure f) Connections : via 50 mm². g) Conductor : 90% pure copper strip (25 mm x 3mm) more

    Brand - Other

    Product code -

    Condition - New

  • NAN 0 Votes

    Purchase products

    Brand - Other

    Product code -

    Condition - New

  • NAN 0 Votes

    GI Pins   For 22kV, Pin Insulators, Qty= 24Nos

    Brand - Other

    Product code -

    Condition - New

  • NAN 0 Votes

    RECHARGEABLE BATTERY OPERATED PORTABLE, DIGITA L, 10 KV INSULATION TESTER WITH TEST LEADS Make : Metrel / Kyoritsu / Tinsley / Chauvin Arnoux, Qty= 0 more

    Brand - Other

    Product code -

    Condition - New

  • NAN 0 Votes

    Welding and Safety MaterialDescription QtyMIG Torch Package gouging tourch  kusumi 6Face shield for grinding with Clear shield (Frame) 17Spare Clear shield for Grinding face shield(without frame) 17Welding Helmet (light weight/impact resistant) 0Welding Gloves - Leather  No.16 148Welding hand sleeves 12Welding Leg sleeves 18Welding Jackets 21SMAW Electrode Holders(Heavy duty holders 500 Amp) 0SMAW Welding Electrodes (ESAB OK 55.00 E7018-1H4R,2,5mm   1 box = 4 pkt-12.0 KG)       220SMAW Welding Electrodes (ESAB OK 55.00 E7018-1 H4R, 3.2mm, 1 box  X 4 pkt -14.8 KG) 1 pkt  3.7 kg 280SMAW Welding Electrodes (ESAB OK 55.00 E7018-1 H4R ,4mm, 1 box X 4 pkt ,14.8 KG) Essab 4 mm 289Welding Wire, 1.2mm AWS 5.20/ E71T-1M rolls, ESAB Vacuum Pack, in Box of 15kg, 7100 88Arc Welding Lead Lugs(crimp type) Brass Type (not in use  not allowd fore modec, this is very less thick) 50Spring Loaded Workpiece Earthing Clamps (Brass Type, 300A) 0Welding Electrode Holder heavy duty 500A Sanritsu  ( with short cable)e Holder   ( with short cable) 31Backing Concave 12 (36m/ctn) 15Mig welding nozzle 29Mig welding cap 2SMAW Welding Electrodes (ESAB OK 55.00 E7018-1 H4R,5mm,1 box X 4 pkt,14.8 KG) Essab 5 mm 1Regulator for oxygen 18Regulator for acetylene 14Flashback arrestor for Cutting Torch (for oxygen) 8Flashback arrestor for Cutting Torch (for acetylene) 7cutting nozzil ( morrris) SIZE  ANME -1(1/32'')     1 MM 18CUTTING Nozzil ( morrris) SIZE  ANME -2(3/64'')     2 MM 53CUTTING Nozzil ( morrris) SIZE  ANME -    3 MM 24CUTTING Nozzil ( morrris) SIZE  ANME -    4 MM 15Gouging nozzle (bent type #19, Morris) 21cutting nozzle (Le Lorrain TOURCH) SIZE G1-HP1- 10-25 2Heating Torch :Heating Torch Set = 2sets for acety & oxy 1Heating outfit accessories (Heating Torch Tip) 2Gas nozzle cleaner  set 33Gas Lighter - flint type. HK 10Spare stone for flint type gas lighter 90Hose Gas, PVC 6mm x 11mm x 100m 2Crimping Nuts fittings for 15 mm Cutting Hose  96CO2 Regulator 5Spring Liner 4Tip Holder 10Gas Diffusor, Black 20Nozzle Dia 16mm 57Collet 2.4 mm 6collet body 2.4 mm   0Long Black Cap 5hose crimbing tool 10Ceramic Nozzles no.1 10Ceramic Nozzles no.2 10Cutting Hoses for Oxygen and acetylene 5Grinding Tools: 220V (angle grinder  125mm = 6units Bosch) 3Carbon brush for 4" grinder, Hitachi 9Carbon brush for 7" grinder, Bosch 16Grinding Tools Accessories (Cutting disc flat 125x3x22mm = 28boxes (25pcs/boxs)) 189Grinding Tools Accessories (grinding disc depressed 125x6x22.2mm = 25pcs/box  0Grinding Tools Accessories (grinding disc depressed 125x6.0x22mm=40 Boxes (25 pcs/box)) 245Grinding Tools Accessories (Grinding disc flat 180x6x22.2mm = 4boxes (100pcs)) 0Grinding Tools Accessories (grinding disc depressed 180x6x22mm = 15boxes (25pcs/box)) 0Grinding Tools Accessories (Cutting disc flat 180x3x22mm = 36boxes (25pcs/box)) 234number punch & letter punch 6,mm 1Chop Saw accessories (Reinforced cut-off wheels 14"x7/64"x1"H) 63Pencil Grinder Metal stone cone type 5Grinding Tools Accessories (Grinding disc 125 x 7.2 x 22.2mm, Pferd, Germany) 288Grinding Tools Accessories (Grinding disc 180 x 7.2 x 22.2mm, Pferd, Germany) 134Grinding Tools Accessories (Cutting disc 125 x 1.6 x 22.2mm, Pferd, Germany) 88Grinding Tools Accessories (Cutting disc 180 x 3.0 x 22.2mm, Pferd, Germany) 87Carbon brush for Bosch 5 inch Electric Die grinder (125mm) 13Carbon brush for Bosch 7 inch Electric Die grinder (180mm) 12Carbon brush for pencil grinder, Bosch 15Pencil grinder metal stone cylindrical type, Ireland 20Buffing Wheel flap disc 125X22X23 0safety harness   white 21First Aid Box  4Eye wash Bottle (big size bottle) 5Eye wash Station, Haws USA 5Ear plugs- disposable  3M, Corded foam ear plug,  22Barrication tape (Red and white)- 2" 23M 6000 Series Half Piece Respirator 39Fire Blanket (1mm thk x 1M wide x 50 Mtrs long) 5Fume Mask (3M) 8514  N95 (10 pcs / box) 33Helmets ANSI grade with strap - WHITE 8Helmets ANSI grade with strap - YELLOW 18Safety Boots - Size 38, Kings 0Safety Boots - Size 40, Kings 1Safety Boots - Size 42, Kings 2Safety Boots - Size 43, Kings 2Rubber Boots - Size 42, Kings 1Rubber gloves long sleeves - chemical resistant 3cover all Orange color - Size 38 with reflective tape (S) 8cover all Orange color - Size 40 with reflective tape (M) 8cover all Orange color - Size 42 with reflective tape (L) 0cover all Orange color - Size 44 with reflective tape (XL)   0cover all Orange color - Size 46 with reflective tape (XXL) 8Disposable white coverals XL 34Reflector Jackets for firewatcher, Fluorescent 8Duct Tape - 2" wide 72Fall Arrestor (Inertia Reel) Camp Safety,Length = 15 Mtr, Re-actable Fall Arrester 10Spare cartridge 3M#2091 P100 particulate filter (to suit 3M 6000 Series Half piece Respirator) 55Blower  12" Portable Explosion proof Ventilator 230V, 1 PH 50/60Hz, Atex certified, USA 3Blower duct (Flexible Duct, Explosion proof )  12" x 10 Mtrs 4Blower 440 Volts (6 outlets, 440V 3PH, 50/60Hz, 9470m2/h) 600mm c/w on-off switch, explosion proof, Atex certified 6Ventilation Chutes (Transparent) - 100MTRS ROLL 4PNEUMATIC Chipping Gun, with adaptor 2Spare Needles for above , Box 5Water Hose 1" x 100mtrs  1Whip checks (Whip lash arrestor), Dixon, USA 38Quick Release Fittings Male and Female -1/2 inch  50Quick Release Fittings Male and Female -3/4 inch 20Quick Release Fittings Male and Female -1 inch  20Coupling fitting for air and water hose Male and Female   1/2 nch  22Coupling fitting for air and water hose   Male and Female  3/4 inch  33Coupling fitting for air and water hose  Male and Female   1 inch  35Air and Water hose Bolted Clip - 1/2 Inch  40Air and Water hose Bolted Clip - 3/4 Inch  50Air and Water hose Bolted Clip - 1 Inch  35G I Plug for 1/2 12G I Plug for 3/4 12G I Plug for 1 inch  13Coupling reducer fro 1" to 3/4 " to 1/2  inch  50T conection 3/4" 20Niple 1/2 212Niple 3/4 26Niple 1 inch  59Ball valve 3/4" 8Quick release couplings(Male & Female set) to suit air hose : 1"  4Water Hose ø 13X21x 40mtrs  8Water Hose 13.3X1/4" BS5120 300 P.S.I 3Water Hose ø 26X36x 50mtrs  1Water Hose 3/4" 1Air Filter /Lubrication with Pneumatic winch 1Pallet jack 2 ton  2Sling Lifting(Nylon) - 5 Ton (along with Test cert) x 4 m 3Wire Rope Mechanical Splice Slings - 1 Ton  x 1 m 1Wire Rope Mechanical Splice Slings - 2 Ton  x 2 m 2Wire Rope Mechanical Splice Slings - 5 Ton  x 4 m 3Wire rope  Winch (Trifor) 3 ton  1Wire rope  Winch (Trifor)1 ton  1Wire Sling (1T - 2M) 2Webbing sling (2T - 6M) 4Webbing sling (3T - 3M) 2Webbing sling (3T - 6M) 3Webbing sling (4T - 4M) 2Working Gloves - Leather (1 dozen per packet) 81Cotton gloves(Dotted) (1 Dozen per packet) 300Rigging Gloves (h/d yellow palm leather gloves)  (1 Dozen per packet) 165Cotton Rugs (Kg) 18WD - 40 - 277 ML 30Cable Ties (nylon white 12" x 100's) 25Rain Coat XL - Vinyl 30Tarpauline 8' x12'  (0.4mm thk, green colour) 1Paint brush 4" 46Paint brush 2" 14Knife  1Nylon Rope 1/2" 200 Mtrs. 2Pad lock with keys - 50mm 5Hand hammers -ball pin (Big size)  5Hand Hammers -ball pin (small size)  5Measuring Tape - 5 mtrs (Stanley) 3Grease Gun, Make : Pressol, 500 cm3. 2Teflon Tape - 12mm wide 4Tube cutter for 10mm pipe, Japan 2Standard Steel Wedges - 6" 19Standard Steel Wedges - 8" 22Insulation Tape 3mm 0Spanner Set: Combination Spanner Set 1/2'~1" 9Pcs , Stanley 4Hammers bound:  2 lbs    1 kg        ( brass) 0Brass hammering spanners (22mm) 0Brass hammering spanners (24mm) 0Brass hammering spanners (27mm) 0Brass hammering spanners (30mm) 0Brass hammering spanners (32mm) 2Electric Drills accessories (Drill set 3mm~25mm each, Evacut) 2Piano Wire (1mm roll) 3Measuring Tape 5Mtr, Stanley  1Square (graduated): tri square 8", Stanley 10Square (graduated): 24", Stanley 12Steel Rule - 1 Meter 5Chisel (cold chisel 3/4", Meco) 8Crow Bars 24" 4Crow Bars 36" 4Center Punch 6", D/Ace 10Scrapers (s/s scraper 2", Hans) 11Caliper 18" (vernier caliper 18", Germany) 2Chipping Hammers (spring handle, Meco) 12Files round 2Files flat 7Claw Bar, 36" 1Hacksaw Frame for 12" BLade, Eclipse, UK 21Hacksaw 12" Blade length, Eclipse, UK 480Wire Cup Brush (CS) - 4" x 2.0 x M14 (brass type) (cs type) 24Wire Brush (CS) 134Alen Key Set (1.5-12mmsize) 7Metal Tool box 900  x 450 x 400mm 3Tube bender (3/8 - 2")  with accessories 1Metal Cutter for GI Sheet (Tin snip 12" UK) 4Wire Brush metal 6Metal Cutter for GI Sheet 0Nails 100mm 11Nails 60 mm 21Nails 100 mm 3Cable Cutter 2Insulated Screw Driver 26" Long/10/14TP1-BI-Metal saw blade 0Crimping Nuts ,Fittings  and Oring Clip for 6 mm  0Crimping Nuts ,Fittings  and Oring Clip for 8 mm  16Crimping Nuts ,Fittings  and Oring Clip for 10 mm  17Crimping tools for 6 mm , 8 mm and 10 mm  5Chalk line (2mm )3o metrs roll Stanley  9Welding mask Accessories - Clear glasses  88Welding mask Accessories - Dark  glasses  No. 10 17Welding mask Accessories - Dark  glasses  No. 11 14Welding mask Accessories - Dark  glasses  No. 12 8Dust Musk(3M) Batch 8210 , N95 Particulat respirator  1125Fume mask (3M)Batch 8210,N95 c/w cardriges 3M 2091 0masking tape 2" 60masking tape 1" 19Rice Bag ( White plastic type not the cotton type) 0Spare Lubricator & Filter Assembly (Spare) 3Safety Glass - Clear  6Safety Glass - Dark  10Marking chalk 21Funnel (fuel filling) 3Jug (oil filling) 3Scissors 1Crimping Nuts MH8 (1.5-10 mm) 2Silicon 25Silicon gun 5 more

    Brand - Other

    Product code -

    Condition - New

  • NAN 0 Votes

    Street Pole Height-40 foot to 45 foot

    Brand - Other

    Product code -

    Condition - New

  • NAN 0 Votes

    Street Pole Dimesions:-Height-40 foot to 45 foot

    Brand - Other

    Product code -

    Condition - New

  • NAN 0 Votes

    Street light pole with junction box Height-15ft

    Brand - Other

    Product code -

    Condition - New

  • NAN 0 Votes

    Solar Street light pole Height= 8 meter, 50 Nos for 2 Way and 2Nos for 3 way more

    Brand - Other

    Product code -

    Condition - New

  • NAN 0 Votes

     Street Light pole 1. Street Light pole ( Octagonal POLE 8 MTRS LONG above Ground, Qty= 14 Nos, ) 2. BACK CLAMP FOR POLE MS FLAT 50X6 MM, Qty= 28 nos  3. Hot dipped galvanised steel swaged tubular pole conforming to IS: 2713-1980 (part I to II) with galvanised base plate of size 400mm x 400mm x 7mm in position including excavation of the pit and filling the same with C.C. of M-10 grade (1:3:6) from base plate to 50cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 cm beyond 114.3mm outer dia around the pole. Duly finished with cement plaster, earthing terminals , cable entry, GI cable sleeve complete as required. The pole shall be galvanised using ISI mark tube for structural purpose, Qty= 5 nos more

    Brand - Other

    Product code -

    Condition - New

1-10 of 113

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Not getting what you want ?? Please Let Us Know What You Want or Call +91 8928001122 Toll Free or WhatsApp 8600391133

Send Enquiry

Contracting Bazar

Contracting Bazar